It is used in the transfer of moxibustion and oil, diesel, glycol and mineral based liquids.
OEM No: A470801152
Model Version: Arocs

The oil pan is a crucial component in a car's engine system that acts as a reservoir that holds engine oil. An oil pan located under the engine block collects the oil circulating in the engine, ensuring proper lubrication of moving parts.
OEM No: A4710106913
Model Version: Arocs

The crank seal is one of the main parts of the engine that ensures the movement of the pistons. One end is connected to the camshaft and provides movement of the camshaft. The other end is where the movement is transmitted to the gearbox. There are markings at both ends. These gaskets are called crank seal gaskets. These seals surround the shaft and prevent oil leakage around the shaft. As a result, the amount of engine oil is prevented from decreasing and oil remains in the system. Felt is basically a rubber pad.
OEM No: A0159974946
Model Version: Arocs

The upper end of the connecting rod is the part that connects to the piston, this upper part is called the connecting rod foot. The small compartment at the top of the connecting rod is called the pin slot. The part of the connecting rod that connects to the crankshaft is called the connecting rod head. At the lower end of the connecting rod is the bearing seat with connecting bolts on both sides.
OEM No: A4710300860

Pins are machine elements, usually cylindrical, that prevent the parts from slipping, enable their positions to be determined and center the parts by passing them through the appropriate holes of the moving or interlocking parts that are desired to be connected to each other.
OEM No: N000000004340
Model Version: Arocs

In gas engines, a Vibration Damper is a device used to dampen the torsional vibrations of the crankshaft. The crankshaft is subject to torsional vibrations as it converts the movement of the pistons into rotational motion.
OEM No: A4710351700
Model Version: Arocs

Hexagonal head screws have a washer surface and a chamfered point on the bearing surface. Hexagonal bolts are often used in the construction industry, where mechanical properties are more critical than dimensional tolerances. Hex head screws are often used in precision applications that require tight tolerances.
OEM No: A9909901401
Model Version: Arocs

A bolt is a metal fastener that holds machine parts together. The important thing to remember is that bolts are the only type of fastener that can be used. A nut is a metal fastener with a threaded part and one or two, typically round notches, on the flat surface.
OEM No: A4220350071
Model Version: Arocs

It is a large cylindrical gear that rotates directly with the movement of the crank connected to the crankshaft and provides the continuity of its movement by spending the power it receives at the time of ignition for the rotation of the engine at other times. Together with the crankshaft, it provides the balance of the engine. It offers high-quality, excellent performance and durability suitable for the Arocs models. With its original design, it provides safe and long-lasting use.
OEM No: A4710303305
Model Version: Arocs