To prevent engine oil from spilling through the required hole, a camshaft seal is used, which fits tightly around the camshaft and seals the port. This seal is made of natural or synthetic rubber and reinforced with a metal ring.
OEM No: A0149979846
Model Version: Arocs

Sealing elements used to create connections resistant to very high pressures to prevent unwanted gas or liquid leaks between fixed components are called gaskets. Gaskets are one of the most important components used in the manufacturing industry.
OEM No: A4720110180
Model Version: Arocs

A rocker head gasket is a rubber or cork gasket designed to provide a seal between the rest of the engine and the valve system components and to hold the oil used to lubricate those components
OEM No: A4710160521
Model Version: Arocs

With the help of the current directed by the control buttons, the motors can move on both sides.
OEM No: A4710157102
Model Version: Arocs

The EGR (Exhaust Gas Recirculation) valve is a part that allows a certain amount of exhaust gas to return to the intake manifold in internal combustion engines. This valve opens and closes depending on the operating conditions of the engine, allowing some of the exhaust gases to be directed back to the cylinder.
OEM No: A4710500527

The cylinder head gasket is the element that seals between the cylinder head and the engine block. It is a thin, temperature-resistant element placed between the block where the cylinders are located and the cover. When the engine temperature rises excessively, this gasket burns first.
OEM No: A4710161220
Model Version: Arocs

It is used in the transfer of moxibustion and oil, diesel, glycol and mineral based liquids.
OEM No: A470801152
Model Version: Arocs

The oil pan is a crucial component in a car's engine system that acts as a reservoir that holds engine oil. An oil pan located under the engine block collects the oil circulating in the engine, ensuring proper lubrication of moving parts.
OEM No: A4710106913
Model Version: Arocs

The crank seal is one of the main parts of the engine that ensures the movement of the pistons. One end is connected to the camshaft and provides movement of the camshaft. The other end is where the movement is transmitted to the gearbox. There are markings at both ends. These gaskets are called crank seal gaskets. These seals surround the shaft and prevent oil leakage around the shaft. As a result, the amount of engine oil is prevented from decreasing and oil remains in the system. Felt is basically a rubber pad.
OEM No: A0159974946
Model Version: Arocs

The upper end of the connecting rod is the part that connects to the piston, this upper part is called the connecting rod foot. The small compartment at the top of the connecting rod is called the pin slot. The part of the connecting rod that connects to the crankshaft is called the connecting rod head. At the lower end of the connecting rod is the bearing seat with connecting bolts on both sides.
OEM No: A4710300860

Pins are machine elements, usually cylindrical, that prevent the parts from slipping, enable their positions to be determined and center the parts by passing them through the appropriate holes of the moving or interlocking parts that are desired to be connected to each other.
OEM No: N000000004340
Model Version: Arocs

In gas engines, a Vibration Damper is a device used to dampen the torsional vibrations of the crankshaft. The crankshaft is subject to torsional vibrations as it converts the movement of the pistons into rotational motion.
OEM No: A4710351700
Model Version: Arocs